ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  2. REMOVE ENGINE UNDER COVER LH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  4. REMOVE ENGINE UNDER COVER RH

  5. DRAIN ENGINE COOLANT

    Click here

  6. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  7. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. A01W3WP

      Disconnect the 2 engine wire clamps.

    2. Disconnect the engine coolant temperature sensor connector.

    3. A01W08ME05
      Text in Illustration
      *1 Ball Joint Lock Nut Wrench
      *2 Gasket

      Using a 19 mm ball joint lock nut wrench, remove the engine coolant temperature sensor.

    4. Remove the gasket from the engine coolant temperature sensor.