CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL VVT SENSOR

   
   

   1. Clean and degrease the threads of the bolt for the camshaft position sensor.

   2. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note

      Make sure that the O-ring is not cracked or does not move out of place during installation.

   3. Install the 4 VVT sensors with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   4. Connect the 4 VVT sensor connectors.

2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

   Click here.