THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY


    1. A01W2PBE05

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω
      Text in Illustration
      *a

      Component without harness connected

      (Throttle with motor body assembly)

      If the result is not as specified, replace the throttle with motor body assembly.