HEATED OXYGEN SENSOR INSTALLATION

PROCEDURE

1. INSTALL HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

   
   
   1. 

      Text in Illustration

      *a	Fulcrum Length 30 mm (1.18 in.)
      *b	Fulcrum Length 180 mm (7.09 in.)

      Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.

      SST

      09224-00011

      Torque:

      without SST

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      with SST

      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      
      

      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

2. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

   
   
   1. 

      Text in Illustration

      *a	Fulcrum Length 30 mm (1.18 in.)
      *b	Fulcrum Length 180 mm (7.09 in.)

      Using SST, install the heated oxygen sensor to the front exhaust pipe assembly.

      SST

      09224-00011

      Torque:

      without SST

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      with SST

      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      
      

      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

3. INSTALL FRONT EXHAUST PIPE ASSEMBLY

   Click here