INTEGRATION RELAY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 RELAY BLOCK COVER

  2. REMOVE NO. 1 INTEGRATION RELAY


    1. A01W16C

      Disconnect the No. 1 integration relay connector.

    2. A01W1XTE02
      Text in Illustration
      *1 No. 1 Integration Relay
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and separate the No. 1 integration relay from the engine room relay block and junction block assembly.

    3. A01W4FH

      Disconnect the 4 No. 1 integration relay connectors to remove the No. 1 integration relay.