CAMSHAFT OIL CONTROL SOLENOID INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY


    1. A01W4WJE01
      Text in Illustration
      *1 O-ring

      Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

      Note

      Do not damage the O-ring.

    2. A01W23LE21
      Text in Illustration
      *a Adhesive 1324

      Apply adhesive to 2 or 3 threads of 2 new bolts.

      Adhesive
      Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent.

    3. Install the camshaft timing oil control solenoid assembly to the timing chain cover sub-assembly with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.

    4. Connect the camshaft timing oil control solenoid assembly connector.

  2. INSTALL ENGINE MOVING CONTROL ROD BRACKET

    Click here

  3. INSTALL NO. 2 ENGINE MOUNTING STAY RH

    Click here

  4. INSTALL EARTH WIRE

    Click here

  5. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here