ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket to the engine oil temperature sensor.

    2. A01W1R6E01

      Using SST, install the engine oil temperature sensor to the water inlet housing sub-assembly.

      SST
      09817-33191
      Torque:
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Connect the engine oil temperature sensor connector.

  2. ADD ENGINE OIL

    Click here

  3. INSPECT FOR ENGINE OIL LEAK

    Click here

  4. INSTALL ENGINE UNDER COVER LH

    Click here

  5. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  6. INSTALL ENGINE UNDER COVER RH

    Click here

  7. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here