AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A01VZJ6E03
      Text in Illustration
      *a

      Fulcrum Length

      30 mm
      *b

      Fulcrum Length

      300 mm

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST
      09224-00011
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.) and a torque wrench with a fulcrum length of 300 mm (11.8 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

      Tech Tips

      Perform "Inspection After Repair" after replacing the air fuel ratio sensor Click here.

    2. Connect the air fuel ratio sensor connector.

    3. Install the hose clamp.

  2. INSPECT FOR EXHAUST GAS LEAK

  3. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here