CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR

   
   

   1. Camshaft position sensor (for Intake Side)

      
      

      1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

         Note

         If reusing the camshaft position sensor, be sure to inspect the O-ring.

      2. Install the camshaft position sensor with the bolt.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

         Note

         
         

         • If there is any adhesive remaining on the bolt for the camshaft position sensor, clean and degrease the threads of the bolt.

         • If the camshaft position sensor has been struck or dropped, replace it.

         • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

      3. Connect the camshaft position sensor connector.

   2. Camshaft position sensor (for Exhaust Side)

      
      

      1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

         Note

         If reusing the camshaft position sensor, be sure to inspect the O-ring.

      2. Install the camshaft position sensor with the bolt.

         Torque:

         10 N*m  { 102 kgf*cm, 7 ft.*lbf }

         Note

         
         

         • If there is any adhesive remaining on the bolt for the camshaft position sensor, clean and degrease the threads of the bolt.

         • If the camshaft position sensor has been struck or dropped, replace it.

         • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

      3. Connect the camshaft position sensor connector.

2. INSPECT FOR OIL LEAK

3. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here