CAMSHAFT OIL CONTROL VALVE ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Start the engine.

   3. Turn the GTS on.

   4. Turn the A/C switch on.

   5. Inspect the camshaft timing oil control valve assembly (for intake side).

      
      

      1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1).

      2. Check the engine speed while operating the camshaft timing oil control valve assembly (for intake side) using the tester.

         Standard Condition
         Tester Operation Specified Condition 0% Normal engine speed 100% Engine idles roughly or stalls

         Tech Tips

         If the result is not acceptable, allow the engine to cool (engine coolant temperature 50°C (122°F) or less) and perform the Active Test again.

   6. Inspect the camshaft timing oil control valve assembly (for exhaust side).

      
      

      1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).

      2. Check the engine speed while operating the camshaft timing oil control valve assembly (for exhaust side) using the tester.

         Standard Condition
         Tester Operation Specified Condition 0% Normal engine speed 100% Engine idles roughly or stalls

         Tech Tips

         If the result is not acceptable, allow the engine to cool (engine coolant temperature 50°C (122°F) or less) and perform the Active Test again.