6AR-FSE ENGINE CONTROL SERVICE DATA

SPARK PLUG
Standard Insulation Resistance Spark plug (terminal part) - Body ground 10 MΩ or higher
Spark Plug Type DENSO made FK16HBR-J8
Maximum Electrode Gap for Used Spark Plug 1.1 mm (0.0433 in.)
Standard Electrode Gap for New Spark Plug 0.7 to 0.8 mm (0.0276 to 0.0315 in.)
CAMSHAFT TIMING GEAR BOLT
Standard stroke Plunger 4.5 mm (0.177 in.) or more
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
Standard Resistance 20°C (68°F) 6.9 to 7.9 Ω
CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY
Plunger extends outwards Apply battery voltage between the terminals 5.9 mm (0.232 in.) or higher
THROTTLE BODY WITH MOTOR ASSEMBLY
Standard Throttle Valve Opening Percentage Shift lever in N 60% or higher
Standard Resistance 20°C (68°F) 0.3 to 100 Ω
ACCELERATOR PEDAL SENSOR ASSEMBLY
Standard Voltage (Accelerator Position Sensor No. 1 Voltage) Accelerator pedal fully released 0.5 to 1.1 V
Accelerator pedal fully depressed 2.6 to 4.5 V
Standard Voltage (Accelerator Position Sensor No. 2 Voltage) Accelerator pedal fully released 1.2 to 2.0 V
Accelerator pedal fully depressed 3.4 to 4.75 V
MASS AIR FLOW METER SUB-ASSEMBLY
Mass Air Flow Sensor Idling (After the engine warms up) 1.0 to 4.0 gm/sec
2000 rpm (After the engine warms up) 4.1 to 8.1 gm/sec
3000 rpm (After the engine warms up) 6.2 to 11.2 gm/sec
Standard Resistance 4 (THA) - 2 (E2G) -20°C (-4°F) 13.6 to 18.4 kΩ
20°C (68°F) 2.21 to 2.69 kΩ
60°C (140°F) 0.49 to 0.67 kΩ
ENGINE COOLANT TEMPERATURE SENSOR
Standard Resistance 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
ENGINE OIL TEMPERATURE SENSOR
Standard Resistance 30°C (86°F) 2.465 to 3.213 kΩ
KNOCK CONTROL SENSOR
Standard Resistance 25°C (77°F) 120 to 280 kΩ
AIR FUEL RATIO SENSOR
Standard Resistance 1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher
HEATED OXYGEN SENSOR
Standard Resistance 1 (HT1B) - 2 (+B) 20°C (68°F) 9 to 14 Ω
1 (HT1B) - 4 (E2) Always 10 kΩ or higher
EFI MAIN RELAY (NO. 1 INTEGRATION RELAY)
Standard Resistance 1A-8 - 1B-1 Battery voltage not applied between terminals 1C-7 and 1E-2 10 kΩ or higher
1A-8 - 1B-1 Battery voltage applied between terminals 1C-7 and 1E-2 Below 1 Ω
1C-4 - 1B-1
1C-9 - 1B-1
1C-10 - 1B-1
EFI MAIN2 RELAY (NO. 1 INTEGRATION RELAY)
Standard Resistance 1A-6 - 1D-1 Battery voltage not applied between terminals 1A-8 and 1E-2 10 kΩ or higher
1A-6 - 1D-1 Battery voltage applied between terminals 1A-8 and 1E-2 Below 1 Ω
1A-7 - 1D-1
1C-6 - 1D-1
IG2 RELAY (NO. 1 INTEGRATION RELAY)
Standard Resistance 1A-1 - 1D-3 Battery voltage not applied between terminals 1C-8 and 1E-2 10 kΩ or higher
1A-1 - 1D-3 Battery voltage applied between terminals 1C-8 and 1E-2 Below 1 Ω
1A-3 - 1D-3
1C-1 - 1D-3
1C-2 - 1D-3
1C-5 - 1D-3
EDU RELAY (EDU)
Standard Resistance 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
Battery voltage applied between terminals 1 and 2 Below 1 Ω