| Starter assembly | Standard current: 90 A or less at 11.5 V |
| Starter magnetic switch assembly | Standard resistance 50 - C: Below 1 Ω 50 - Body: Below 2 Ω |
| Starter armature assembly | Standard resistance Commutator: Below 1 Ω Commutator - Armature Coil Core: 10 kΩ or higher |
| Standard length: 3.1 mm (0.122 in.) | |
| Maximum length: 3.8 mm (0.150 in.) | |
| Starter commutator end frame | Standard length: 9.0 mm (0.354 in.) |
| Minimum length: 4.0 mm (0.157 in.) | |
| Standard resistance Positive (+) - Negative (-): 10 kΩ or higher |
|
| Snap ring | Maximum length: 5.0 mm (0.196 in.) |
| Starter relay | 3 - 5: 10 kΩ or higher (when battery voltage not applied between terminals 1 and 2) 3 - 5: Below 1 Ω (when battery voltage applied between terminals 1 and 2) |
| Engine switch | H44-5 (SS1) - H44-6 (GND) / H44-1 (SS2) - H44-6 (GND) Specified resistance Not pushed: 10kΩ or higher Pushed: Below 1 Ω |
| Standard condition: Illuminates Measurement condition Battery positive (+) → Terminal H44-9 (SWIL) Battery negative (-) → Terminal H44-6 (GND) |