NAME PLATE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE


  1. INSTALL SYMBOL EMBLEM


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new symbol emblem.

    3. Remove the release paper from the symbol emblem.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the symbol emblem as shown in the illustration.

      A01W5J9

  2. INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.

    3. Remove the release paper from the No. 1 luggage compartment door name plate

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 1 luggage compartment door name plate as shown in the illustration.

      A01W1S3E01
      Text in Illustration
      *a Profile of Luggage Compartment Door Panel - -
      Reference Measurement
      Area Measurement
      A 37.1 mm (1.46 in.)
      B 108.8 mm (4.28 in.)
      C 41.3 mm (1.63 in.)

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 3 luggage compartment door plate.

    3. Remove the release paper from the No. 3 luggage compartment door plate.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 3 luggage compartment door plate as shown in the illustration.

      A01W1CIE01
      Text in Illustration
      *a Profile of Luggage Compartment Door Panel - -
      Reference Measurement
      Area Measurement
      A 41.1 mm (1.62 in.)
      B 108.8 mm (4.28 in.)
      C 36.7 mm (1.44 in.)
      D 41.1 mm (1.62 in.)
      E 108.8 mm (4.28 in.)
      F 36.7 mm (1.44 in.)
      G 41.1 mm (1.62 in.)
      H 108.8 mm (4.28 in.)
      I 36.7 mm (1.44 in.)