REAR LIGHT ASSEMBLY DISASSEMBLY

PROCEDURE

1. REMOVE BACK-UP LIGHT BULB

   
   

   1. 

      Disengage the clamp.

   2. Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to disconnect it.

   3. Remove the back-up light bulb from the rear light socket and wire.

2. REMOVE REAR LIGHT SOCKET AND WIRE

   
   

   1. 

      Disconnect the connector to remove the rear light socket and wire.

3. REMOVE REAR LIGHT GASKET

   
   

   1. 

      Remove the rear light gasket.

      Note

      
      

      • Be sure to remove all the traces of the old gasket from the vehicle body.

      • Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.

4. REMOVE REAR COMBINATION LIGHT PROTECTOR

   
   

   1. 

      Remove the 2 rear combination light protectors.

      Note

      
      

      • Be sure to remove all the traces of the old protectors from the vehicle body.

      • Do not reuse the removed protectors. Be sure to install new rear combination light protectors to prevent water ingress.