REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Engage the guide to temporarily install the rear combination light assembly.

    2. Install the screw.

    3. Install the rear combination light assembly with the 3 nuts.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    4. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

    Click here

  3. INSTALL ROPE HOOK (for LH Side)

    Click here

  4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)

    Click here

  5. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)

    Click here

  6. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)

    Click here

  7. INSTALL ROPE HOOK (for RH Side)

    Click here

  8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

    Click here

  9. INSTALL REAR FLOOR FINISH PLATE

    Click here

  10. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

    Click here

  11. INSTALL SPARE WHEEL COVER PAD RH

    Click here

  12. INSTALL SPARE WHEEL COVER PAD LH

    Click here

  13. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  14. INSTALL REAR BUMPER ASSEMBLY

    Click here