REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BUMPER UPPER RETAINER


    1. A01W0PG

      Disengage the 2 guides to remove the rear bumper upper retainer.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01W21I

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to disconnect it.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. A01W1X9

      Disconnect the connector to remove the rear combination light socket and wire sub-assembly.

  4. REMOVE REAR COMBINATION LIGHT GASKET


    1. A01W3KG

      Remove the rear combination light gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the vehicle body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.