REAR COMBINATION LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE SPARE WHEEL COVER PAD LH

    Click here

  4. REMOVE SPARE WHEEL COVER PAD RH

    Click here

  5. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

    Click here

  6. REMOVE REAR FLOOR FINISH PLATE

    Click here

  7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)

    Click here

  8. REMOVE ROPE HOOK (for LH Side)

    Click here

  9. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH

    Click here

  10. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

    Click here

  11. REMOVE ROPE HOOK (for RH Side)

    Click here

  12. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)

    Click here

  13. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)

    Click here

  14. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01VZ5X

      Disconnect the connector.

    2. Remove the 3 nuts.

    3. A01W0YD

      Remove the screw.

    4. Disengage the guide and remove the rear combination light assembly.