REAR SPOILER INSTALLATION

PROCEDURE


  1. INSTALL REAR SPOILER SUB-ASSEMBLY

    Tech Tips

    When installing a new rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Spoiler Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body or rear spoiler sub-assembly excessively.


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install the rear spoiler sub-assembly.


      1. Using a heat light, heat the vehicle body and a new rear spoiler sub-assembly.

      2. Remove the release paper from the rear spoiler sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. A01W1V6

        Engage the 3 clips.

      4. Install the new rear spoiler sub-assembly with the 2 nuts.

  2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here

  3. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here