REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE NO. 1 REAR BUMPER PLATE


    1. A01W28QE05
      Text in Illustration
      *a Protective Tape
      *b Hook

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook to remove the No. 1 rear bumper plate.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A01W1NJ

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      B001OGU Protective Tape
    2. A01W5JC

      Remove the 2 screws.

    3. A01W1II

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Disengage the claw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01W1TJ

      Remove the 6 screws.

    6. A01VZUP

      Remove the 2 clips.

    7. A01W39M

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A01VZ86

      Disengage the 2 claws as shown in the illustration.

    9. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the No. 2 luggage room wire connector.

    10. Remove the rear bumper assembly.