FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE FOG LIGHT ASSEMBLY LH

    Click here

  2. REMOVE FOG LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE NO. 1 ULTRASONIC SENSOR WITH CLIP (w/ LEXUS Parking Assist-sensor System)

    Click here

  4. REMOVE NO. 2 ULTRASONIC SENSOR WITH CLIP (w/ LEXUS Parking Assist-sensor System)

    Click here

  5. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)

    Click here

  6. REMOVE NO. 4 ENGINE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Disengage the 10 clamps to remove the No. 4 engine room wire.

      A01VZZT

  7. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Type A)


    1. A01W3U8

      Remove the 2 screws.

    2. Disengage the 4 claws to remove the front bumper extension mounting bracket.

  8. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Type B)


    1. A01VZLI

      Remove the 2 screws.

      Disengage the 2 claws to remove the front bumper extension mounting bracket.

  9. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Type C)


    1. A01W5BK

      Remove the 2 screws.

      Disengage the 2 claws to remove the front bumper extension mounting bracket.

  10. REMOVE FRONT FENDER LINER RETAINER


    1. A01VZJV

      Disengage the claw to remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  11. REMOVE FRONT BUMPER HOLE COVER


    1. A01W24WE05
      Text in Illustration
      *a Hook

      Disengage the 4 claws.

    2. Disengage the hook to remove the front bumper hole cover.

  12. REMOVE FOG LIGHT MOUNTING BRACKET LH


    1. A01W0RS

      Remove the 3 screws and fog light mounting bracket LH.

  13. REMOVE FOG LIGHT MOUNTING BRACKET RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. REMOVE FOG LIGHT COVER LH


    1. A01W3PE

      Disengage the 5 claws to remove the fog light cover LH.

  15. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  16. REMOVE RADIATOR GRILLE SEAL


    1. A01W4NB

      Disengage the 5 clips and remove the radiator grille seal.

      Text in Illustration
      B001OGU Double-sided Tape

  17. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-crash Safety System)

    Click here

  18. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM


    1. A01VZLT

      Remove the 2 spring nuts.

    2. Disengage the guide and claw to remove the radiator grille (or front panel) emblem.

  19. REMOVE RADIATOR GRILLE


    1. A01W43G

      Remove the 2 clips and 6 screws.

      Text in Illustration
      B001O8N Screw
      B001OAO Clip
    2. A01W1SJ

      Remove the 2 screws.

    3. A01W3P9

      Disengage the 12 claws and 6 guides to remove the radiator grille.

  20. REMOVE RADIATOR GRILLE MOULDING


    1. A01W2VS

      Remove the 4 screws.

    2. A01W0TQ

      Disengage the 12 claws to remove the radiator grille moulding.

  21. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY


    1. A01W233

      Disengage the 16 claws to remove the lower radiator grille sub-assembly.

  22. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01W37E

      Remove the screw.

    2. Disengage the 4 claws to remove the front bumper hole cover LH.

  23. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  24. REMOVE LOWER RADIATOR GRILLE MOULDING


    1. A01W426

      Remove the 4 screws.

    2. A01W33H

      Disengage the 11 claws to remove the lower radiator grille moulding.

  25. REMOVE FRONT BUMPER STAY LH


    1. A01W1BF

      Remove the bolt.

    2. Using a screwdriver, disengage the clip as shown in the illustration.

    3. A01W2RX

      Disengage the 3 claws to remove the front bumper stay LH.

  26. REMOVE FRONT BUMPER STAY RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01W06P

      Disengage the 2 guides to remove the front bumper energy absorber.

  28. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01W150

      Disengage the 6 clamps.

    2. A01W0RW

      Remove the 6 bolts and front bumper reinforcement sub-assembly.