FOG LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FOG LIGHT ASSEMBLY LH


    1. A01W3O3E01
      Text in Illustration
      *a

      Component without harness connected

      (Fog Light Assembly LH)

      Connect a positive (+) lead from the battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).

    2. Check that the fog light comes on.

      OK
      The fog light comes on.

      If the result is not as specified, replace the fog light assembly LH.

  2. REMOVE FOG LIGHT ASSEMBLY RH


    1. A01W3O3E01
      Text in Illustration
      *a

      Component without harness connected

      (Fog Light Assembly RH)

      Connect a positive (+) lead from the battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).

    2. Check that the fog light comes on.

      OK
      The fog light comes on.

      If the result is not as specified, replace the fog light assembly RH.