WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    1. A01W0HX

      Remove the 3 screws and front wheel opening extension pad RH.

  3. REMOVE FRONT FENDER LINER RH


    1. A01VZVFE01
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees counterclockwise and remove the pin hold clip.

    2. A01W26Y

      Remove the 4 screws and bolt.

    3. A01W2TW

      Remove the 6 clips.

    4. A01VZ9C

      Using a 4 mm hexagon wrench, remove the 3 hexagon screws.

    5. Remove the 2 grommets and front fender liner RH.

      Tech Tips

      The grommets need to be replaced with new ones because they will break when they are removed.

  4. DRAIN WASHER FLUID


    1. A01W1PJ

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01W46K

      Disconnect the connector.

    2. Remove the windshield washer motor and pump assembly as shown in the illustration.