RAIN SENSOR REMOVAL

PROCEDURE


  1. REMOVE RAIN SENSOR COVER


    1. A01W44U

      Disengage the 2 claws and remove the rain sensor cover as shown in the illustration.

  2. REMOVE RAIN SENSOR


    1. A01W381

      Disconnect the connector.

    2. A01W2FNE01
      Text in Illustration
      *1 Stopper

      Release the stopper by pulling the stopper down and disconnect the rain sensor as shown in the illustration.

  3. CLEAN WINDSHIELD GLASS

    Tech Tips


    • The rain sensor tape is reusable. Only replace the tape if it is damaged or contaminated.

    • Check that there is no rain sensor tape residue remaining on the windshield glass. If there is, remove the residue before installing the rain sensor.