LUGGAGE COMPARTMENT DOOR DISASSEMBLY

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

   
   

   1. 

      Disengage the 2 claws and guide and open the cover.

   2. 

      Remove the 2 screws and luggage compartment door assist grip.

2. REMOVE LUGGAGE COMPARTMENT DOOR COVER

   
   

   1. w/o Power Trunk Lid System:

      
      

      1. 

         Using a clip remover, remove the 11 clips and luggage compartment door cover.

   2. w/ Power Trunk Lid System:

      
      

      1. 

         Using a clip remover, remove the 11 clips.

      2. 

         Disengage the 2 claws and remove the luggage compartment door cover.

3. REMOVE DOOR CONTROL SWITCH (w/ Power Trunk Lid System)

   Click here

4. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Power Trunk Lid System)

   Click here

5. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY (w/ Power Trunk Lid System)

   Click here

6. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

   Click here

7. REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. 

      Disengage the clamp.

   3. Remove the 2 nuts and luggage compartment door lock cylinder assembly.

8. REMOVE LUGGAGE ELECTRICAL KEY SWITCH

   Click here

9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

   
   

   1. 

      Disengage the clamp.

   2. Remove the clip and luggage compartment door hinge cover LH.

10. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (w/ Power Trunk Lid System)

    Click here

11. REMOVE SPARE WHEEL COVER PAD LH (w/ Power Trunk Lid System)

    Click here

12. REMOVE SPARE WHEEL COVER PAD RH (w/ Power Trunk Lid System)

    Click here

13. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Power Trunk Lid System)

    for Rear Side: Click here

14. REMOVE REAR FLOOR FINISH PLATE (w/ Power Trunk Lid System)

    Click here

15. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Power Trunk Lid System)

    for RH side: Click here

16. REMOVE ROPE HOOK (w/ Power Trunk Lid System)

    Click here

17. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)

    Click here

18. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH (w/ Power Trunk Lid System)

    Click here

19. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    
    

    1. 

       Remove the clip and luggage compartment door hinge cover RH.

20. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

21. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

22. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

23. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor)

    Click here

24. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

25. REMOVE LUGGAGE COMPARTMENT DOOR CUSHION

    
    

    1. 

       Disengage the 2 claws and remove the 2 luggage compartment door cushions.