LUGGAGE COMPARTMENT DOOR OPENER SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Data List /

    5. Read the Data List according to the display on the GTS.

      Back Door (w/ Power Trunk Lid System)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Half Latch SW Luggage door closer assembly half-latch switch signal / ON or OFF

      ON: Half-latch switch of luggage door closer assembly on (Luggage compartment door open)

      OFF: Half-latch switch of luggage door closer assembly off (Luggage compartment door closed)

      • See "Luggage Door Closer Operation Timing Chart".

        Click here

      • When this item is abnormal, there is a problem with the half-latch switch of the luggage door closer assembly or related parts.
      Pawl Position Switch Luggage door closer assembly pawl switch signal / ON or OFF

      ON: Pawl switch of luggage door closer assembly on

      OFF: Pawl switch of luggage door closer assembly off (Luggage compartment door closed)

      • See "Luggage Door Closer Operation Timing Chart".

        Click here

      • When this item is abnormal, there is a problem with the pawl switch of the luggage door closer assembly or related parts.
      IG SW Engine switch on (IG) / ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 "OFF" is also displayed for this item when the engine switch is on (ACC).
      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Trunk/BDoor Open SW Luggage door opening switch assembly signal / ON or OFF

      ON: Luggage door opening switch assembly on

      OFF: Luggage door opening switch assembly off

      		 -
      Trunk Main SW Luggage door opening cancel switch assembly signal / ON or OFF

      ON: Luggage door opening cancel switch assembly on

      OFF: Luggage door opening cancel switch assembly off

      		 -
      Luggage courtesy SW Luggage door closer assembly courtesy switch signal / ON or OFF

      ON: Luggage door closer assembly courtesy switch on

      OFF: Luggage door closer assembly courtesy switch off

      		 For vehicles with power trunk lid system, this item is not related to luggage compartment door condition.
      Entry&Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Tr/B-Door Unlock SW Luggage electrical key switch / ON or OFF

      ON: Luggage electrical key switch pushed

      OFF: Luggage electrical key switch not pushed

      		 When this item is abnormal, there is a problem with the luggage electrical key switch of the luggage door closer assembly*1, luggage compartment door lock assembly*2 or related parts.

      • *1: w/ Power Trunk Lid System

      • *2: w/o Power Trunk Lid System

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test /

    5. Perform the Active Test according to the display on the GTS.

      Back Door (w/ Power Trunk Lid System)
      Tester Display Test Part Control Range Diagnostic Note
      Latch Release Operate luggage door closer assembly latch release OFF or ON -
      Main Body (w/o Power Trunk Lid System)
      Tester Display Test Part Control Range Diagnostic Note
      Trunk and Back-Door Open Operate luggage compartment door lock assembly latch release OFF or ON -