DATA LIST
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensor, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Trunk/BDoor Open SW | Luggage door opening switch assembly signal / ON or OFF | ON: Luggage door opening switch assembly on OFF: Luggage door opening switch assembly off |
- |
| Trunk Main SW | Luggage door opening cancel switch assembly signal / ON or OFF | ON: Luggage door opening cancel switch assembly on OFF: Luggage door opening cancel switch assembly off |
- |
| Luggage courtesy SW | Luggage door closer assembly courtesy switch signal / ON or OFF | ON: Luggage door closer assembly courtesy switch on OFF: Luggage door closer assembly courtesy switch off |
For vehicles with power trunk lid system, this item is not related to luggage compartment door condition. |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Half Latch SW | Luggage door closer assembly half-latch switch signal / ON or OFF | ON: Half-latch switch of luggage door closer assembly on (Luggage compartment door open) OFF: Half-latch switch of luggage door closer assembly off (Luggage compartment door closed) |
|
| Pawl Position Switch | Luggage door closer assembly pawl switch signal / ON or OFF | ON: pawl switch of luggage door closer assembly on OFF: pawl switch of luggage door closer assembly off (Luggage compartment door closed) |
|
| PBD Close SW | Door control switch signal / ON or OFF | ON: Door control switch is on OFF: Door control switch is off |
When this item is abnormal, there is a problem with the door control switch or related parts. |
| IG SW | Engine switch on (IG) / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
| PBD Position (3/4-Open) | Luggage compartment door position (3/4 open - Full open) / CAUTION or OK | CAUTION: Luggage compartment door position is not 3/4 opened - fully opened OK: Luggage compartment door position is 3/4 opened - fully opened |
- |
| PBD Position (2/4-3/4) | Luggage compartment door position (Full close - 3/4 open) / CAUTION or OK | CAUTION: Luggage compartment door position is not 2/4 opened - 3/4 opened OK: Luggage compartment door position is 2/4 opened - 3/4 opened |
- |
| PBD Position (1/4-2/4) | Luggage compartment door position (Full close - 2/4 open) / CAUTION or OK | CAUTION: Luggage compartment door position is not 1/4 opened - 2/4 opened OK: Luggage compartment door position is 1/4 opened - 2/4 opened |
- |
| PBD Position (Close-1/4) | Luggage compartment door position (Full close - 1/4 open) / CAUTION or OK | CAUTION: Luggage compartment door position is not fully closed - 1/4 opened OK: Luggage compartment door position is fully closed - 1/4 opened |
- |
| Closed Position Initialization | Status of luggage compartment door fully closed position / Initialized or Not initialized | Initialized: Fully closed position of luggage compartment door is memorized (initialized) Not initialized: Fully closed position of luggage compartment door is not memorized (not initialized) |
When "Not initialized is displayed for this item, power trunk lid system is not operated. |
| PBD Power Operation | Turns power trunk opener and closer function / Valid or Invalid | Valid: Power trunk opener and closer is valid Invalid: Power trunk opener and closer is invalid |
- |
| #Codes | Number of trouble codes/Min.: 0, Max.: 255 | Number of DTCs stored | - |
ACTIVE TEST
Tech Tips
Using the GTS to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / (desired system) /Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Latch Release | Operate luggage compartment door latch release | OFF or ON | - |
| PBD Motor | Operate luggage closer motor | OFF or Forward OFF or Reverse |
- |
| PBD Clutch | Operate luggage closer motor clutch | OFF or ON | - |
| PBD Buzzer | Operate warning buzzer | OFF or ON | - |
| PBD Close SW Light | Operate luggage compartment door closer switch light | OFF or ON | - |