REAR SUNSHADE ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR WINDOW SHADE ASSEMBLY


    1. Check the operation of the motor.


      1. A01W53WE05
        Text in Illustration
        *a

        Component without harness connected

        (Rear Window Shade Assembly)

        Apply battery voltage and check the operation of the rear window shade assembly.

        OK
        Connection Result

        Battery positive (+) → 1

        Battery negative (-) → 2

        		 Rear sunshade raises

        Battery positive (+) → 2

        Battery negative (-) → 1

        		 Rear sunshade lowers

        If the result is not as specified, replace the rear window shade assembly.

    2. Check the operation of the limit switch.


      1. A01W4B8E02
        Text in Illustration
        *1 On
        *2 Off
        *a

        Component without harness connected

        (Rear Window Shade Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 - 4 Limit switch on Below 1 Ω
        3 - 4 Limit switch off 10 kΩ or higher

        If the result is not as specified, replace the rear window shade assembly.