COMPRESSOR(for 6AR-FSE) REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE RADIATOR ASSEMBLY

    Click here

  3. REMOVE V-RIBBED BELT

    Click here

  4. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01VZGT

      Remove the bolt.

    2. Disconnect each connector.

    3. Disengage the clamp to disconnect the wire harness.

    4. A01W4AR

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor assembly with pulley.

    5. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  5. DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE


    1. A01VZK1

      Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor assembly with pulley.

    2. Remove the O-ring from the No. 1 cooler refrigerant suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  6. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY


    1. A01W4MX

      Remove the 2 bolts and 2 nuts, and bracket.

    2. A01W1VA

      Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor assembly with pulley.

      Tech Tips

      Remove the compressor assembly with pulley from the vehicle with the stud bolts remaining in the compressor assembly with pulley.