COOLER EXPANSION VALVE INSTALLATION

PROCEDURE

1. INSTALL COOLER EXPANSION VALVE

   
   

   1. Apply sufficient compressor oil to 2 new O-rings and the fitting surfaces of the cooler expansion valve.

      Compressor oil
      ND-OIL 8 or equivalent

   2. Install 2 new O-rings to the No. 1 cooler evaporator sub-assembly.

   3. Using a 4 mm hexagon wrench, install the cooler expansion valve with the 2 hexagon bolts.

      Torque:

      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

2. CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

   Click here

3. CONNECT SUCTION PIPE SUB-ASSEMBLY

   Click here

4. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

   for LHD: Click here

   for RHD: Click here

5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

6. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

   Click here

7. WARM UP ENGINE

   Click here

8. INSPECT FOR REFRIGERANT LEAK

   Click here