PTC HEATER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL QUICK HEATER ASSEMBLY

   
   

   1. 

      Insert the quick heater assembly as shown in the illustration.

   2. Install the quick heater assembly with the 2 screws.

   3. Engage the 5 clamps.

   4. Connect the connector.

   5. Install the bolt.

      Torque:

      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

2. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

   Click here

3. INSTALL SHIFT LEVER SUPPORT

   for U660E Automatic Transmission / Transaxle: Click here

   for U760E Automatic Transmission / Transaxle: Click here

   for U761E Automatic Transmission / Transaxle: Click here

4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

   Click here