PTC HEATER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  2. REMOVE SHIFT LEVER SUPPORT

    for U660E Automatic Transmission / Transaxle: Click here

    for U760E Automatic Transmission / Transaxle: Click here

    for U761E Automatic Transmission / Transaxle: Click here

  3. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY

    Click here

  4. REMOVE QUICK HEATER ASSEMBLY


    1. A01W0AM

      Remove the bolt.

    2. Disconnect the connector.

    3. Disengage the 5 clamps.

    4. A01W2M0

      Remove the 2 screws and quick heater assembly as shown in the illustration.