FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT BELT ANCHOR PLATE


    1. Install the front seat belt anchor plate.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A01W2FUE04
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Connect the connector.

    4. Engage each clamp under the front seat assembly.

  3. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01W17ZE04
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Connect the connector.

    4. Engage each clamp under the front seat assembly.

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD

    Click here

  5. CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY

    Click here

  6. INSTALL FRONT SEAT ASSEMBLY

    Click here