SEAT VARIABLE CUSHION SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT VARIABLE CUSHION SWITCH


    1. Measure the resistance according to the value(s) in the table below.

      A01W1K0E01
      Text in Illustration
      *A for LHD *B for RHD
      *1 Front *2 Rear
      *a

      Component without harness connected

      (Seat Variable Cushion Switch)

      		 - -
      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      2 - 5 Front Below 1 Ω
      3 - 4
      1 - 5 Off Below 1 Ω
      3 - 4
      1 - 5 Rear Below 1 Ω
      2 - 3
      for RHD
      Tester Connection Condition Specified Condition
      3 - 4 Front Below 1 Ω
      1 - 5
      3 - 2 Off Below 1 Ω
      1 - 5
      1 - 4 Rear Below 1 Ω
      3 - 2

      If the result is not as specified, replace the seat variable cushion switch.