SEAT MEMORY SWITCH INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH


    1. A01W01RE01
      Text in Illustration
      *A

      • for Driver (for LHD)

      • for Front Passenger (for RHD)
      *B

      • for Front Passenger (for LHD)

      • for Driver (for RHD)
      *1 M1 Switch
      *2 M2 Switch
      *3 M3 Switch
      *4 SET Switch
      *a

      Component without harness connected

      (Seat Memory Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 5 M1 switch is pressed Below 1 Ω
      M1 switch is not pressed 10 kΩ or higher
      2 - 5 M2 switch is pressed Below 1 Ω
      M2 switch is not pressed 10 kΩ or higher
      3 - 5 M3 switch is pressed Below 1 Ω
      M3 switch is not pressed 10 kΩ or higher
      4 - 5 SET switch is pressed Below 1 Ω
      SET switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the seat memory switch.