REAR SEAT ASSEMBLY REASSEMBLY

PROCEDURE

INSTALL BENCH TYPE REAR SEAT CUSHION COVER
1. Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.
2. Using hog ring pliers, install 20 new hog rings.
  Note
  
  Be careful not to damage the bench type rear seat cushion cover.
  
  When installing the hog rings, take care to minimize wrinkles as much as possible.
3. Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 34 new hog rings.
  Note
  
  Be careful not to damage the bench type rear seat cushion cover.
  
  When installing the hog rings, take care to minimize wrinkles as much as possible.
INSTALL BENCH TYPE REAR SEATBACK COVER
1. Temporarily install the bench type rear seatback cover to the bench type rear seatback pad.
2. Using hog ring pliers, install 28 new hog rings.
  Note
  
  Be careful not to damage the bench type rear seatback cover.
  
  When installing the hog rings, take care to minimize wrinkles as much as possible.
3. Using hog ring pliers, install the bench type rear seatback cover to the bench type rear seatback pad with 30 new hog rings.
  Note
  
  Be careful not to damage the bench type rear seatback cover.
  
  When installing the hog rings, take care to minimize wrinkles as much as possible.
INSTALL REAR CENTER SEAT HEADREST SUPPORT
1. Engage the 4 claws to install the 2 rear center seat headrest supports.
INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)
1. Engage the 4 claws to install the 2 rear seat headrest supports.
INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)
1. Engage the 4 claws to install the 2 rear seat headrest supports.
INSTALL REAR CENTER SEAT SHOULDER BELT GUIDE
1. Engage the guide.
2. Install the rear center seat shoulder belt guide with the 2 screws.
INSTALL REAR SEAT SHOULDER BELT GUIDE LH
1. Engage the guide.
2. Install the rear seat shoulder belt guide LH with the 2 screws.
INSTALL REAR SEAT SHOULDER BELT GUIDE RH
1. Engage the guide.
2. Install the rear seat shoulder belt guide RH with the 2 screws.
INSTALL REAR SEAT WIRE (w/ Climate Control Seat System)
1. Engage the 3 clamps to install the rear seat wire.
2. Connect the 2 connectors.
INSTALL HEATER WIRE (w/ Climate Control Seat System)
1. Engage the 2 clamps to install the 2 heater wires.
2. Connect the 2 connectors.
INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Climate Control Seat System)

Click here
INSTALL REAR SEAT AIRBAG ASSEMBLY LH

Click here
INSTALL REAR SEAT AIRBAG ASSEMBLY RH

Tech Tips

Use the same procedure as for the LH side.
INSTALL REAR CENTER SEAT ARMREST BOX
1. Install the rear center seat armrest box to the rear center seat armrest pad as shown in the illustration.
2. Engage each hook to connect the rear center seat armrest cover sub-assembly to the rear center seat armrest box.
INSTALL REAR CONSOLE BOX WIRE (w/ Climate Control Seat System)
1. Engage the 3 clamps to install the rear console box wire.
INSTALL REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY
1. Insert the rear center seat armrest cup holder sub-assembly as shown in the illustration.
2. Install the rear center seat armrest cup holder sub-assembly with the 3 screws.
INSTALL COOLER CONTROL SWITCH ASSEMBLY
1. w/ Climate Control Seat System:
  1. Install the cooler control switch assembly Click here.
INSTALL REAR CENTER SEAT ARMREST BOX ASSEMBLY
1. w/o Climate Control Seat System:
  1. Engage the 4 claws to install the rear center seat armrest box assembly.
INSTALL REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY
1. w/o Climate Control Seat System
  1. Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the rear center seat armrest box assembly.
  2. Install the screw.
2. w/ Climate Control Seat System
  1. Engage the 3 guides and 8 claws to install the rear center seat armrest panel sub-assembly with the cooler control switch assembly.
  2. Install the screw.
INSTALL CENTER ARMREST LOCK SUB-ASSEMBLY
1. Install the center armrest lock sub-assembly with the 4 screws.
INSTALL ARMREST CONSOLE HINGE SUB-ASSEMBLY
1. Install the armrest console hinge sub-assembly with the 2 screws.
INSTALL REAR NO. 1 CENTER SEAT ARMREST PLATE
1. Install the rear No. 1 center seat armrest plate with the 4 screws.
INSTALL REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY
1. Engage the guide.
2. Install the rear center seat armrest door sub-assembly with the 2 screws.
3. Close the rear center seat armrest door sub-assembly as shown in the illustration.
INSTALL CENTER SEAT INNER ARMREST PLATE
1. Engage the 9 claws and 3 guides to install the center seat inner armrest plate to the rear seat armrest hole board sub-assembly.
INSTALL REAR CENTER SEAT ARMREST ASSEMBLY
1. Engage the hook to install the rear center seat armrest assembly to the rear seat armrest hole board sub-assembly.
INSTALL REAR CENTER SEAT ARMREST HINGE
1. Engage the 2 guides.
2. Install the rear center seat armrest hinge with the 2 bushes and 2 screws.
  
  Torque:
  
  4.6 N*m { 47 kgf*cm, 41 in.*lbf }
INSTALL REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX
1. Engage the 2 claws.
2. Using hog ring pliers, install 4 new hog rings.
3. Text in Illustration
  
  *1 Hook
  
  *2 Clamp
  
  Install the rear center seat armrest assembly with box with the 2 nuts.
  
  Torque:
  
  8.0 N*m { 82 kgf*cm, 71 in.*lbf }
4. w/ Climate Control Seat System:
  1. Engage the 3 clamps.
5. Engage the 2 hooks.

Text in Illustration
*1	Hook
*2	Clamp