EXHAUST SYSTEM


  1. CONSTRUCTION


    1. Exhaust Manifold Sub-assemblies (RH and LH)


      1. Stainless steel exhaust manifolds with an integrated Three-Way Catalytic converter (TWC) are used for warm-up of the TWC in the front exhaust pipe assembly and for weight reduction.

        A01VYXPE01
        Text in Illustration
        *1 TWC *2 Exhaust Manifold Sub-assembly RH (for Bank 1)
        *3 Exhaust Manifold Sub-assembly LH (for Bank 2) - -

    2. Exhaust Pipe


      1. The exhaust pipes are made of stainless steel for improved rust resistance.

      2. A thin-wall, ceramic type TWC is used.

      3. Tail exhaust pipe assemblies are used to ensure engine performance and reduce exhaust noise.

        A01VZ0JE02
        Text in Illustration
        *A Models with Tail Exhaust Pipe Baffle Sub-assembly *B Models without Tail Exhaust Pipe Baffle Sub-assembly
        *1 Front Exhaust Pipe Assembly *2 TWC
        *3 Center Exhaust Pipe Assembly *4 Tail Exhaust Pipe Assembly RH
        *5 Tail Exhaust Pipe Assembly LH *6 Tail Exhaust Pipe Baffle Sub-assembly

    3. Tail Exhaust Pipe Baffle


      1. A special tail exhaust pipe baffle sub-assembly has been adopted.

      2. Clearance between each bolt of the tail exhaust pipe baffle sub-assembly and each bolt hole of the bracket makes it possible to adjust the installation angle of the tail exhaust pipe baffle sub-assembly.

      3. For details, refer to the Repair Manual.