BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rustproof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.

A002KNN Flat Finishing A002KNK No Flat Finishing
A002KM1
A002KLV
A002KKO
A002KLU
A002KOZE01
*1 for Sliding Roof:
*2 for Glass Roof:
A002KQGE01
*1 for Sliding Roof:
*2 for Glass Roof:
A002KMU
A002KI7