UNDER BODY THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)

A, a Front Bumper Reinforcement Installation Nut M10 (0.39)
B, b Front Crossmember Standard Hole φ13 (0.51)
C, c Front Side Member Standard Hole φ18 (0.71)
D, d Front Suspension Member Installation Nut M16 (0.63)
E, e Front Suspension Member Installation Nut M16 (0.63)
F, f Torque Box Front Standard Hole φ25 (0.98)
G, g Front Side Member Standard Hole φ18 (0.71)
H, h Front Floor Under Reinforcement Standard Hole φ15 (0.59)
J, j Rear Floor Side Member Standard Hole φ18 (0.71)
K, k Rear Suspension Member Installation Nut M12 (0.47)
L, l Rear Suspension Member Installation Nut M12 (0.47)
M, m Transport Hook Installation Nut M10 (0.39)
A002KQ3E01