LUGGAGE DOOR THREE-DIMENSIONAL DISTANCE

Tech Tips


  • In cases in which only one dimension is given, left and right are symmetrical.


  • For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).

Measuring Point Name
Symbol Name

Hole Diameter

mm (in.)
A, a Roof Panel/Quarter Panel Adjoining Portion -
B, b Quarter Panel Standard Hole φ10 (0.39)
C Upper Back Reinforcement Center Mark -
D, d Quarter Panel/Upper Back Reinforcement Adjoining Portion -
E, e Quarter Panel End Housing/Luggage Compartment Opening Trough Adjoining Portion -
F, f Quarter Panel Standard Hole φ13 (0.51)
G, g Trim Installation Hole φ8.5 (0.33)
H, h Trim Installation Hole φ8.5 (0.33)
J, j Lock Striker Installation Nut M8 (0.31)
K, k Rear Floor Crossmember Standard Hole φ13 (0.51)
A002KQ9E01
*1 Distance between points other than those above
*2 mm
*3 (in.)