REAR FLOOR PAN ASSEMBLY REPLACEMENT



  1. REMOVAL

    Symbol meaning
    A002KKM Remove Weld Points
    A002KNQ Remove Weld Points
    A002KJAE01
    *a LH Side:
    *b RH Side:

  2. INSTALLATION

    Symbol meaning
    A002KKA Plug Weld
    A002KIP Plug Weld
    A002KQJ Fillet Weld

      INSTALLATION POINT

    1. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

    2. Before temporarily installing the new parts, weld the spare wheel clamp bracket, rear floor pan reinforcement, rear floor pan and weld bolts with the standard number of welding points.

    3. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A002KK3E01
    A002KHSE01
    *1 LH Side:
    *2 RH Side: