WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED / RECONNECTED

Refer to the LEXUS Repair Manual for each inspection procedure.

1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED

   Necessary Procedures	Effect/Inoperative Function When Necessary Procedures are not Performed
   Drive the vehicle until stop and start control is permitted (approximately 5 to 40 minutes)	Stop and start system
   Correct the steering angle neutral point	Parking assist monitor system
   Power trunk lid system not operate	Power trunk lid system

   
   

   • *1: for Parking Assist Monitor System (w/ Parallel Parking Assist Function)

   • *2: for Parking Assist Monitor System (w/o Parallel Parking Assist Function)

   Note

   
   

   • After the engine switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal (for Navigation System).

   • After the engine switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 90 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal (for Audio and Visual System).