REAR BUMPER(w/o Rear No. 2 Seat) INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER ASSEMBLY


    1. w/ LEXUS Parking Assist-sensor System:


      1. Connect the connector.

    2. B007XXEC01
      B007Z37 Install in this Direction

      Engage the 2 claws as shown in the illustration.

    3. B007Z3BC01
      B007Z37 Install in this Direction

      Engage the 5 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. Install the 6 clips.

    5. Install the rear bumper assembly with the 4 screws.

  2. CONNECT QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH


    1. B007ZSWC01
      B007Z37 Install in this Direction

      Engage the clip and 4 claws as shown in the illustration.

    2. Using a 4 mm hexagon socket wrench, install the screw.

    3. Install the quarter outside moulding sub-assembly LH with the clip.

  3. CONNECT QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. INSTALL REAR LIGHT COVER LH

    Click here

  5. INSTALL REAR LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.