FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    C197119E03

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Seat belt fastened

      (Buckle switch is on)

      1 MΩ or higher

      1 - 2

      Seat belt unfastened

      (Buckle switch is off)

      Below 1 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Front Seat Inner Belt)

      If the result is not as specified, replace the inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    B216526E01
    Table 2. Text in Illustration

    *1

    Component without harness connected

    (Front Seat Inner Belt)

    *2

    Connector A

    *3

    Connector B

    -

    -

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      A1 - B1

      Always

      Below 1 Ω

      A2 - B3

      Seat belt fastened

      (Buckle switch is on)

      1 MΩ or higher

      A2 - B3

      Seat belt unfastened

      (Buckle switch is off)

      Below 1 Ω

      If the result is not as specified, replace the inner belt assembly.