ЗАПУСК И ОСТАНОВ


  1. CONSTRUCTION


    1. The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.

    2. The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.


      • Brake Actuator Assembly

      • Power Steering ECU Assembly

      • Spiral Cable with Sensor Sub-assembly

      • Combination Meter Assembly

      • Parking Brake ECU Assembly

      • Air Conditioning Control Assembly

      • Clearance Warning ECU Assembly

      • Integration Control and Panel Assembly

    3. An external backup boost converter (eco run vehicle converter assembly) is used.*

    4. When the audio system is used during idle stop, the external backup boost converter (eco run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.*

      *: Models with navigation system

      Figure 1. Backup Boost Converter

      A01IDD0E01

      Figure 2. External Backup Boost Converter (Eco Run Vehicle Converter Assembly) (Models with Navigation System)

      B006K8QE01
      *1 No. 2 BBC Fuse
      *2 External Backup Boost Converter (Eco Run Veicle Converter Assembly)
      *3 Stereo Component Amplifier Assembly
      *4 Engine Stop and Start ECU