NAVIGATION SYSTEM(for SD) Cursor or Map Rotates when Vehicle Stopped

DTC Code DTC Name
Cursor or Map Rotates when Vehicle Stopped

PROCEDURE

  1. CHECK CONDITION

    1. E106418

      Check with the customer if the vehicle has been turned by a turntable.

      OK

      Vehicle has not been turned by a turntable.

      Tip:

      If the vehicle is turned on a turntable with the engine switch on (IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the engine switch off and back to ON again with the vehicle completely stopped.

    Result

    Proceed to

    OK

    NG
    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click hereClick here

    NG

    TURN ENGINE SWITCH ON (IG) WHEN VEHICLE IS COMPLETELY STOPPED