STARTING SYSTEM


  1. OUTLINE


    1. A conventional reduction type starter is used.

    2. A starter control (cranking hold function) is used on the models with entry and start system. Once the engine switch is pushed, this control continues to operate the starter until the engine has started.

  2. SPECIFICATION

    Rating Output 1.4 kW
    Rating Voltage 12 V
    Length*1 153.1 mm (7.51 in.)
    Weight 3700 g (lb)
    Rotating Direction*2 Clockwise

    Tech Tips

    *1: Length from the mounted area to the rear end of the starter.

    *2: Viewed from pinion side.