FUEL SENDER GAUGE ASSEMBLY(for Rear Air Fuel Ratio Sensor) INSTALLATION

PROCEDURE

1. INSTALL FUEL SENDER GAUGE ASSEMBLY

   
   

   1. Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

      Note

      Be careful not to bend the arm of the fuel sender gauge assembly.

   2. Connect the fuel sender gauge assembly connector.

   3. Engage the clamp to connect the wire harness.

      Note

      Make sure that the wire harness has a moderate amount of slack.

2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here