REAR CENTER SEAT INNER BELT ASSEMBLY (for 3 Point Type Rear Center Seat Belt) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. A01DYHKE01
      Text in Illustration
      *1 Protruding Part
      *2 Floor Anchor
      *3 Arrow
      *a Vehicle Front (0°)
      *b 5°

      Install the rear No. 1 seat inner belt assembly RH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Do not overlap the anchor part of the rear No. 1 seat inner belt assembly RH and protruding parts of the vehicle body.

      • Make sure that the arrow on the rear No. 1 seat inner belt assembly RH floor anchor is facing towards the front of the vehicle.

      • Install the rear No. 1 seat inner belt assembly RH so that the angle of the floor anchor is with in the standard range.

        Standard
        0°to 5°

  2. INSTALL REAR SEAT ASSEMBLY


    1. Fold up the rear seat cushion assembly.

    2. A01E0YME01
      Text in Illustration
      *1 Hook
      *2 Guide

      Place the rear seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    3. Attach the 2 hooks and 2 guides.

    4. Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.

    5. Temporarily install the rear seat assembly with the 4 bolts.

    6. Tighten the 4 bolts in the order shown in the illustration.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    7. Return the seat cushion to its original position.

    8. A01DXKNE01
      Text in Illustration
      *1 Seat Cushion Rubber Band

      Pass the rear No. 1 seat inner belt assembly LH through the seat cushion rubber band.

    9. A01E08TE01
      Text in Illustration
      *1 Protruding Part
      *2 Floor Anchor
      *3 Arrow
      *a Vehicle Front (0°)
      *b 5°

      Connect the rear No. 1 seat inner belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Do not overlap the anchor part of the rear No. 1 seat inner belt assembly LH and protruding parts of the vehicle body.

      • Make sure that the arrow on the rear No. 1 seat inner belt assembly LH floor anchor is facing towards the front of the vehicle.

      • Connect the rear No. 1 seat inner belt assembly LH so that the angle of the floor anchor is with in the standard range.

        Standard
        0°to 5°
    10. A01E0GPE01
      Text in Illustration
      *1 Seat Cushion Rubber Band

      Pass the rear No. 1 seat inner belt assembly RH through the seat cushion rubber band.

    11. A01E0EGE01
      Text in Illustration
      *1 Fold Seat Stopper Band Button

      Lock the seat cushion lock.

    12. Attach the fold seat stopper band button.

  3. INSTALL REAR SEAT HINGE COVER LH


    1. A01DV8G

      Attach the guide.

    2. Push the rear seat hinge cover LH to attach the 2 claws and install the rear seat hinge cover LH.

  4. INSTALL REAR SEAT HINGE COVER RH

    Tech Tips

    Use the same procedures described for the LH side.