OIL PUMP INSPECTION


  1. REMOVE OIL PUMP RELIEF VALVE


    1. A01DX68E04

      Using a 27 mm socket wrench, remove the plug and gasket.

    2. Remove the valve spring and relief valve.

  2. REMOVE OIL PUMP COVER


    1. Remove the 7 bolts and oil pump cover.

  3. REMOVE OIL PUMP ROTOR SET


    1. A01DV2DE01

      Remove the oil pump rotor set from the timing chain cover.

  4. INSPECT OIL PUMP RELIEF VALVE


    1. A01DZ2EE01

      Coat the relief valve with engine oil and drop it into the relief valve hole.

    2. Check that the relief valve falls in smoothly by its own weight.

      If it does not, replace the relief valve. If necessary, replace the timing chain cover.

  5. INSPECT OIL PUMP ROTOR SET


    1. A01E12XE01

      Install the rotors to the oil pump body with the rotors' marks facing outward. Check that the rotors revolve smoothly.

    2. Check the tip clearance.


      1. Using a feeler gauge, measure the clearance between the drive and driven rotor tips, as shown in the illustration.

        Tip clearance
        Condition Clearance
        Standard 0.040 to 0.160 mm (0.0016 to 0.0063 in.)
        Maximum 0.26 mm (0.0102 in.)

        If the tip clearance is greater than the maximum, replace the oil pump rotor set.

    3. A01E2ADE01

      Check the side clearance.


      1. Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge, as shown in the illustration.

        Side clearance
        Condition Clearance
        Standard 0.025 to 0.075 mm (0.0010 to 0.0030 in.)
        Maximum 0.130 mm (0.0051 in.)

        If the side clearance is greater than the maximum, replace the oil pump rotor set.

    4. A01DZC5E01

      Check the body clearance.


      1. Using a feeler gauge, measure the clearance between the oil pump body and driven rotor, as shown in the illustration.

        Body clearance
        Condition Clearance
        Standard 0.025 to 0.325 mm (0.0010 to 0.0128 in.)
        Maximum 0.425 mm (0.0167 in.)

        If the body clearance is greater than the maximum, replace the oil pump.

  6. INSTALL OIL PUMP ROTOR SET


    1. A01E12XE01

      Coat the oil pump gear set with engine oil and place it into the pump body with the marks facing outward (oil pump cover side). Check that the rotors revolve smoothly.

  7. INSTALL OIL PUMP COVER


    1. A01DV2DE01

      Install the oil pump cover with the 7 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  8. INSTALL OIL PUMP RELIEF VALVE


    1. A01DX68E01

      Coat the relief valve with engine oil.

    2. Insert the relief valve and spring into the pump body hole.

    3. Install a new gasket to the plug.

    4. Using a 27 mm socket wrench, install the plug.

      Torque:
      49 N*m  { 500 kgf*cm, 36 ft.*lbf }