DRIVE BELT INSTALLATION

PROCEDURE

  1. INSTALL V-RIBBED BELT

    1. A322075C01

      *a

      4 mm Bi-hexagon Wrench

      *b

      Hole

      w/ Air Conditioning System:

      1. Set the V-ribbed belt onto every pulley.

      2. Attach a wrench to the hexagonal portion (A) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly counterclockwise, remove the 4 mm bi-hexagon wrench.

        Note:

        Check that the V-ribbed belt is properly set to each pulley.

    2. A322076C01

      *a

      4 mm Bi-hexagon Wrench

      *b

      Hole

      w/o Air Conditioning System:

      1. Set the V-ribbed belt onto every pulley.

      2. Attach a wrench to the hexagonal portion (A) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly counterclockwise, remove the 4 mm bi-hexagon wrench.

        Note:

        Check that the V-ribbed belt is properly set to each pulley.